![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhbT4KgbdyIq3jccDo-bCqjGADzoPMcbaYPKNxZnj73x_CfctCW_Jjrw4NKUqa5hVY5SNbiaees-rSvNjuNYztIs0TiF5udI9GggMFn4Jc0-K6bP_N479fPjhH4nWOt-kJQWg0uzBzngt8/s1600/doorsbild.jpg)
The new door design is already being produced when full height door fronts are concerned.
All steel doors on the lift will be delivered with the new design in order
to keep a consistent look, which applies for lifts supplied with:
• a gate on top floor,
• specially sized doors,
• one/several doors equipped with a concealed door opener.
Please note: When a steel door (full height) without a door opener or with an external door opener is ordered the current design (A1, A2) will be delivered.
The concealed automatic door opener & door closer provides a gate of outstanding modern design.
All gates with or without door openers will be of the new design. When gates with door openers are ordered they will always be delivered in the concealed manner.
Production of the new gates is planned to start in week 45.
The concealed door opener as well as the new door fronts will be available in the E-order system from week 43.
Please note the changed cut out size for gates according to below.
New dimensions & designations
Gate
- Current design: A1 & A4
- New design: A15 & A25
Treshhold width
- Current design: 49 mm
- New design: 95 mm
Treshhold height
- New design: 214 mm
Changed cut out size
- See seperate drawing attached
Door front
- Current design: A1 & A2
- New design: A10 & A20
Unchanged cut out width
Changed door front size
- Current design: 56,5 mm
- New design: 68 mm
Unchanged door front width
- Current design: 1360 mm
- New design: 1360 mm